It is very disturbing when you want to play that favorite DVD of yours but discover that it refuses to play. On examining the DVD by giving it a closer look, you find that the surface of the DVD has become either dirty or has got scratched. However, there is no need to fret and fume thinking about how to repair DVD. You can follow some easy steps to repair such DVDs that refuse to play.
Before you begin work on repairing the scratched DVD, you will need the following items for the job:
- Cotton ball
- Non-gel toothpaste
- A piece of soft cloth
When some grease or dirt settles on the surface of the DVD, it may not play. If you find such a problem, you should use a soft cotton cloth that’s somewhat damp to clean the entire surface. You may even use a cleaning wipe for this purpose.
When the problem is that of a scratch, you should place the DVD on a flat surface at first, so that its scratched side faces the upward direction. Next, put a small amount of the non-gel toothpaste on a cotton ball. Lightly press the cotton ball while you apply the toothpaste to the DVD. After you have applied the toothpaste, you will need to wash off the DVD under cold water and use a piece of soft cloth to dry it.
If the above listed steps give no result, it is wise to buy a DVD refinisher, which is a tiny device that causes the DVD to spin, thereby polishing the surface and removing the scratches.
Once your DVD is repaired, take adequate safety measures to avoid future scratches. It is advisable to handle the DVDs by their outside edges and store them in their original casing when you are not using them.